Safety Problems and Solutions: How to Fix a Stuck Seatbelt

Posted by Artem Martynyuk on

Sometimes we are tempted not to wear seatbelts, especially if we are only going for a short trip. But it would help if you kept in mind that they can save lives. Many people try to justify it by saying that the seatbelt is uncomfortable. In this scenario, you should immediately take your car for a dual-stage seatbelt repair. 

You can also do primary seatbelt care in your garage. Here are a few tips:

Check for Obstruction

Of course, the best option is to take your car for a dual-stage seatbelt repair, but, as mentioned earlier, you can do it yourself. The first thing you have to do is check if there is anything that may obstruct the seatbelt. Rub your hand across the seatbelt and see if there is anything that may be a culprit to why it is not functioning correctly.  

Once you get rid of the obstruction, take the seatbelt and pull on it a little. The tension should be even. If it is not, you should take it to a dual-stage seatbelt repair shop and let them look at it. Please also check for wear and tears.

Look at the stitching and make sure that it is intact. You may also check for rips and tears. If there are any, you might want to consider a seatbelt replacement. 

Pull the Belt

You have to make sure that the seatbelt is not twisted. Pull both ends of the belt and see if there is any tension. You have to be patient enough to do this. 

If there is any tension, you have to pull the belt until it is comfortable to wear carefully. If you cannot fix it, you might want to think of a replacement.

Unclog the Seatbelt Mechanism

 You may consider this procedure if you have tried the ones above and still cannot fix it. There are times when you need something that can help you unclog the seatbelt mechanism. A brush or a knife can do the trick. You do not have to twist the knife or the brush. 

If it is not possible to unclog the seatbelt itself, you have to go to a dual-stage seatbelt repair shop. They will tell you what the issue is and then fix it. You can do this yourself, but it will be complicated. Try to avoid it if you can. 

Remove the Side Panel

If it is still not working, you must remove the seatbelt mechanism. You do this by removing the side panel. It is not easy, but you can do it by playing around with the connection. 

You have to be careful not to break any wires or cables. If you have replaced the seatbelt yourself, you might want to take your car to a dual-stage seatbelt repair shop to have them give it a double-check. 


Now that you know these tips and tricks, you can easily repair your stuck seatbelt yourself. The main thing to remember is to be patient. Make sure you have enough time to fix the seatbelt since it can be time-consuming.

If you are not confident with doing the job yourself, you can always seek the help of professionals. Simply mail in your broken seatbelt at Repair My SRS and we’ll take care of the rest. We offer dual-stage seatbelt repair and other seatbelt fixes!

Share this post

← Older Post Newer Post →

Your subscription could not be saved. Please try again.
Your subscription has been successful.


Subscribe. We never spam.